It must be common knowledge among all the ATV enthusiasts that to achieve the best performance from your vehicle, getting the right tire is a must. In the market, various types of ATV tires are available. They may be the gigantic mud tires, the high-grip race tires, the O.E type tires or the trail tires. Brands famous for producing the ATV tires are Goodyear, Maxxis, Gator and ITP.
ATV tires should provide a high class performance both on road as well as off road. The tires should be able to withstand all sorts of off road conditions along with providing a suitable performance on the road. The difference in the terrain use of the tire leads to different tread pattern designs. The aggressive mud tires, for example, have a less tight tread than the All Terrains. This causes them to have a quieter street ride as compared to the boisterous mud tires.
The following things must be regarded when it comes to ATV tires. The ply rating of your tire is an important consideration as different ply ratings are suited to different terrains. Thus, if the vehicle is to be driven through rocky terrain, tires with higher ply ratings should be preferred. This decreases the chances of a puncture. The stars that are imprinted on the side wall of the tire give the ply rating for the tire. As each star represents a rating of 2 ply thence, a tire with three stars would be having a rating of 6 ply and would make a good choice for heavy use.
It is not necessary that you use the maximum air pressure that is listed on the sidewall of the tire. Rather, it is advisable that you run the air pressure that is recommended by your tire manufacturer. Optimal air pressure is essential for good mileage. If you are experiencing air loss in your ATV tire(s), you should check for punctures, impact damage on the tread part of the tire and cracks. Also, valve stem and core should be checked for leakage. This is because an old or damaged valve stem and a loose valve core can be the cause of air loss in your tire.
The sizing of the ATV tires uses a general format of AT25 x 10-12. The dash can be replaced by the letter “R” which represents the radial construction of the tire. The first number will give the overall diameter of the tire and the second number gives the section width. Wheel diameter is given by the third number. Inches are used as the units of measurement. These numbers are merely approximations and originally, the sizes may differ in individual tires.
To save the tires from premature wear and tear and sidewall cracking, the air pressure must be kept within optimal limits. Visual inspections must be carried out regularly to remove any foreign body from the tire tread. The appropriate measures would allow your ATV tires to give a high class performance while letting them last longer.
For tips and information on cheap atv tires visit ATV Tires
categories: atv tires,atv tire,tire,tires,atv